American Steel Profiles ASTM A572 I beam
| Hanti | Faahfaahin / Faahfaahin |
|---|---|
| Heerka Alaabta | ASTM A36 (qaabdhismeedka guud) |
| Xoogga Wax-soo-saarka | ≥250 MPa (36 ksi); Xoogga Jilitaanka ≥420 MPa |
| Cabirka | W8×21 ilaa W24×104 (inji) |
| Dhererka | Kaydka: 6 m & 12 m; Dhererka gaarka ah waa la heli karaa |
| Dulqaadka cabbirka | Waafaqsan GB/T 11263 ama ASTM A6 |
| Shahaadada tayada | EN 10204 3.1; Imtixaanka qolo saddexaad ee SGS/BV |
| Dhamaystir dusha sare | Galvanization-ku-kulul, rinji, iwm.; la beddeli karo |
| Codsiyada | Dhismayaasha, buundooyinka, dhismayaasha warshadaha, badda & gaadiidka |
| Kaarboon u dhiganta (Ceq) | ≤0.45% (weldability wanaagsan); AWS D1.1 waafaqid |
| Tayada dusha sare | Ma jiraan dildilaacyo, nabarro, ama laalaab; fidsanaanta ≤2 mm/m; cirifka cirifka ≤1° |
| Hanti | Tilmaamid | Sharaxaada |
|---|---|---|
| Xoogga Wax-soo-saarka | ≥250 MPa (36 ksi) | Cadaadiska kaas oo walxuhu ka bilaabmo qallafsanaanta balaastikada |
| Xoogga Jilicsan | 400-550 MPa (58-80 ksi) | Cadaadiska ugu badan ka hor inta aan la jebin xiisadda |
| Dheeraynta | ≥20% | Qallafsanaanta caaga ka badan 200 mm dhererka cabbirka |
| Adag (Brinell) | 119-159 HB | Tixraaca adkaanta alaabta |
| Kaarboon (C) | ≤0.26% | Waxay saamaysaa xoogga iyo weldability |
| Manganese (Mn) | 0.60-1.20% | Waxay hagaajisaa xoogga iyo adkaanta |
| Sulfur (S) | ≤0.05% | Baaruud hoose waxay hubisaa adkaanta wanaagsan |
| Fosfooraska (P) | ≤0.04% | Fosfooraska hooseeya wuxuu hagaajiyaa adkaanta |
| Silikoon (Si) | ≤0.40% | Wuxuu kordhiyaa xoog wuxuuna caawiyaa deoxidation |
| Qaabka | Qoto dheer | Balaadhka Flange (gudaha) | Dhumucda Mareegaha (gudaha) | Dhumucda Flange | Miisaanka (lb/ft) |
| W8×21 (Xajmiga la heli karo) | 8.06 | 8.03 | 0.23 | 0.36 | 21 |
| W8×24 | 8.06 | 8.03 | 0.26 | 0.44 | 24 |
| W10×26 | 10.02 | 6.75 | 0.23 | 0.38 | 26 |
| W10×30 | 10.05 | 6.75 | 0.28 | 0.44 | 30 |
| W12×35 | 12 | 8 | 0.26 | 0.44 | 35 |
| W12×40 | 12 | 8 | 0.3 | 0.5 | 40 |
| W14×43 | 14.02 | 10.02 | 0.26 | 0.44 | 43 |
| W14×48 | 14.02 | 10.03 | 0.3 | 0.5 | 48 |
| W16×50 | 16 | 10.03 | 0.28 | 0.5 | 50 |
| W16×57 | 16 | 10.03 | 0.3 | 0.56 | 57 |
| W18×60 | 18 | 11.02 | 0.3 | 0.56 | 60 |
| W18×64 | 18 | 11.03 | 0.32 | 0.62 | 64 |
| W21×68 | 21 | 12 | 0.3 | 0.62 | 68 |
| W21×76 | 21 | 12 | 0.34 | 0.69 | 76 |
| W24×84 | 24 | 12 | 0.34 | 0.75 | 84 |
| W24×104 (Xajmiga la heli karo) | 24 | 12 | 0.4 | 0.88 | 104 |
| Halbeegga | Kala duwanaanshaha caadiga ah | Dulqaadka ASTM A6/A6M | Xusuusin |
|---|---|---|---|
| Qoto dheer (H) | 100-600 mm (4"-24") | ±3 mm (± 1/8) | Waa inuu ku sugnaado cabbirka magaca |
| Balaadhka Flange (B) | 100-250 mm (4"-10") | ±3 mm (± 1/8) | Waxay xaqiijisaa qaadista culayska deggan |
| Dhumucda Shabakadda (t_w) | 4-13 mm | ± 10% ama ± 1 mm | Waxay saamaysaa awoodda dhogorta |
| Dhumucda Flange (t_f) | 6-20 mm | ± 10% ama ± 1 mm | Muhiim u ah leexinta xoogga |
| Dhererka (L) | 6-12 m heerka; caado 15-18 m | + 50 / 0 mm | Looma ogola dulqaad laga jaro |
| Toosanaan | - | 1/1000 oo dherer ah | tusaale ahaan, ugu badnaan 12 mm camber oo loogu talagalay 12m beam |
| Bannaanka Flange | - | ≤4% ee ballaca flange | Waxay hubisaa alxanka saxda ah / toosinta |
| Maroojin | - | ≤4 mm/m | Muhiim u ah alwaaxyada dhaadheer |
Hot Rolled Black:Standard state
Galvanizing-kulul: ≥85μm (waafaqsan ASTM A123), tijaabada buufinta cusbada ≥500h
Dahaarka: Rinjiga dareeraha ah ayaa si siman loogu buufiyay dusha sare ee birta birta iyadoo la isticmaalayo qori buufinta sambabada ah.
| Qaybta Customization | Ikhtiyaarada | Sharaxaada | MOQ |
|---|---|---|---|
| Cabirka | Dhererka (H), Balaadhka Flange (B), Shabakadda & Dhumucda Flange (t_w, t_f), Dhererka (L) | Cabbirrada caadiga ah ama kuwa aan caadiga ahayn; adeeg goyn-ilaa oo diyaar ah | 20 tan |
| Daaweynta Dusha sare | Sida-duuban (madow), Ciid-qarxinta/Qaraxa xabbadda, Saliidda ka-hortagga miridhku, Daahan rinjiyeynta/dahaadhka ah, Galvanizing-kulul | Waxay wanaajisaa iska caabbinta daxalka ee deegaanno kala duwan | 20 tan |
| Habaynta | Qodista, Goynta, Goynta Bevel, alxanka, farsamaynta wejiga dhamaadka, diyaarinta qaabdhismeedka | Lagu sameeyay sawir kasta; ku haboon fiimyada, alwaaxyada, iyo isku xirka | 20 tan |
| Calaamadaynta & Baakadaha | Calaamadaynta khaaska ah, Isku xidhka, Taarikada dhamaadka ilaalinta, Duubista biyuhu, qorshaha rarista weelasha | Waxay xaqiijisaa maaraynta badbaadada iyo dhoofinta, oo ku habboon xamuulka badda | 20 tan |
- Qaab-dhismeedka Dhismaha: alwaaxyada iyo tiirar loogu talagalay dhismooyinka dhaadheer, warshadaha, bakhaarada, iyo buundooyinka kuwaas oo u adeega sida walxaha aasaasiga ah ee qaadida.
Injineerinka Buundada: alwaaxyada hoose ama sare ee labada buundooyinka baabuurta iyo kuwa lugaynaya.
Qalabka Culus & Taageerada WarshadahaQalabka culus iyo qalabyada warshadaha ayaa taageeraya.
Xoojinta Dhismaha: Xoojinta ama beddelka qaab-dhismeedka jira si ay isaga caabiyaan culeysyada sare ama ay iskaga caabiyaan foorarsiga.
Dhismaha Dhismaha
Injineerinka Buundada
Taageerada Qalabka Warshadaha
Xoojinta Dhismaha
1) Xafiiska Laanta - Taageerada Isbaanishka ku hadasha, Kaalmada fasaxida kastamka, iwm.
2) In ka badan 5,000 oo tan oo kayd ah, oo leh cabbirro kala duwan
3) Waxaa soo kormeeray hay'ado awood leh sida CCIC, SGS, BV, iyo TUV, oo wata baakadaha caadiga ah ee badda.
Baakad
Ilaalinta Buuxa: I-beams waxaa lagu duuduubay tapaulin oo ay la socdaan 2-3 baakidh oo qallajiya; Xiritaanka kulaylka, xaashida taarpaulin-ka ee aan roobka lahayn ayaa ka hortagaysa qoyaanka inuu soo galo.
Xidhmo sugan: Xidhmo kasta waxa lagu duuduubay xadhkaha birta ah ee 12-16 mm; u fudud 2-3 tan iyo qalabka wax lagu qaado ee US ku habboon.
Summadaynta Daah-furnaanta: Calaamadaha laba-luqadlaha ah (Ingiriisi iyo Isbaanish) oo leh darajo, tilmaamo, koodka HS, dufcadda # iyo tixraaca warbixinta imtixaanka.
Ilaalinta muuqaalka sare: I-beams ≥800 mm waxaa lagu daaweeyay saliid toosan ka dibna waxaa lagu duuduubay taarpaulin laba jeer.
gaarsiin
Dhoofinta la isku halleyn karo: Wadashaqeynta sidayaasha ugu fiican (MSK, MSC, COSCO ect) si loo xaqiijiyo dhoofinta badbaadada.
Xakamaynta tayada: Nidaamka ISO 9001; Biraha si adag ayaa looga xakameeyaa baakadaha iyada oo loo marayo gaadiidka si loo hubiyo in ay si sax ah u yimaadeen, taas oo kuu ogolaanaysa inaad haysato mashruuc dhib la'aan ah.
S: Waa maxay heerarka I-beams-kaaga ee Bartamaha Ameerika?
J: Our I Beams waxay u hoggaansamaan ASTM A36 & A572 Fasalka 50 kaas oo u wanaagsan Bartamaha Ameerika. Waxa kale oo suurtogal ah in la keeno badeecooyin buuxiya heerarka qaranka (tusaale, MEXICO NOM).
S: Waqti intee le'eg ayaa lagu geynayaa Panama?
J: Waqtiga Tareenka ee Xamuulka Badda ee ka yimaada Dekadda Tianjin kuna socda Aagga Ganacsiga Xorta ah ee Colon 28-32 maalmood oo usbuuc ah. Wax-soo-saarka iyo keenista guud ahaan waa 45-60 maalmood. Gaarsiinta degdegga ah waa la diyaarin karaa, sidoo kale.
S: Ma ka caawisaa furista kastamka?
J: Haa, dilaaliintayada xirfadlayaasha ah ayaa samayn doona caddaynta kastamka, bixinta canshuurta & dhammaan shaqada waraaqaha si loo hubiyo bixinta si habsami leh.
Cinwaanka
Bl20, Shanghecheng, Shuangjie Street, Degmada Beichen, Tianjin, Shiinaha
E-mailka
Taleefanka
+86 13652091506
