Bolt Indhaha Gaarka ah M8 M20 Bir aan miridh lahayn / Kaarboon / Galvanized ah
Xuduudaha faahfaahsan ee alaabta
Faahfaahinta Bolts Muuji
Bolts Madaxa Lix-geesoodka ah
| Shay | Faahfaahinta | Faahfaahinta |
|---|---|---|
| Magaca Badeecada | Bolts Madaxa Lix-geesoodka ah | Boolal hex ah oo caadi ah oo dibadda ah |
| Heerka Caadiga ah | ASTM / DIN / ISO / BS | DIN933, DIN931, ASTM A307, A325, A490 |
| Dhexroorka (Cabbirka) | M6 - M64 | 1/4” – 2-1/2” |
| Dhererka | 10 mm – 500 mm | Dhererka gaarka ah ayaa la heli karaa |
| Nooca Mawduuca | Mawduuc Buuxa / Mawduuc Badh ah | Metric & UNC / UNF |
| Alaab | Bir Kaarboon / Bir Daawaha / Bir aan Daxal lahayn | Fasalka 4.8 / 8.8 / 10.9 / 12.9 |
| Daaweynta Dusha Sare | Madow / Zinc Plated / Hot-Dip Galvanized / Dacromet | Iska caabbinta daxalka ikhtiyaari ah |
| Heerka Xoogga | 4.8 / 6.8 / 8.8 / 10.9 / 12.9 | Xoog sare oo la jiidi karo |
| Nooca Madaxa | Hex Head | Lix-geesood caadi ah |
| Codsiga | Dhismaha / Qaab-dhismeedka Birta / Makiinado | Xalka xidhitaanka si ballaaran loo isticmaalo |
| Dulqaad | Saxnaanta caadiga ah | Sida waafaqsan heerarka caalamiga ah |
| Baakad | Kartoon / Baaldi alwaax ah / Jumlo | Dhoofinta baakadaha caadiga ah |
| Shahaadada | MTC / ISO / SGS | Kormeerka dhinac saddexaad ayaa diyaar ah |
| Waqtiga Bixinta | 7–15 Maalmood | Iyada oo ku saleysan tirada dalabka |
Boolal god Hex ah
| Shay | Faahfaahinta | Faahfaahinta |
|---|---|---|
| Magaca Badeecada | Boolal god Hex ah | Boolal Madaxeed oo Allen / Socket ah |
| Heerka Caadiga ah | DIN / ISO / ASTM / BS | DIN912, ISO4762, ASTM A574 |
| Dhexroorka (Cabbirka) | M3 - M48 | 1/8” – 2” |
| Dhererka | 6 mm – 300 mm | Dhererka gaarka ah ayaa la heli karaa |
| Nooca Mawduuca | Mawduuc Buuxa / Mawduuc Qayb ah | Mitir / UNC / UNF |
| Alaab | Bir Kaarboon / Bir Daawaha / Bir aan Daxal lahayn | 304 / 316 ayaa diyaar ah |
| Heerka Xoogga | 8.8 / 10.9 / 12.9 | Waxqabadka sare ee jiidista |
| Nooca Madaxa | Madaxa godka (Allen) | Madaxa silindrical ah oo leh god hex ah |
| Nooca Darawalka | Saldhigga Hex | Si fudud loogu adkeyn karo awoodda sare |
| Daaweynta Dusha Sare | Oxide Madow / Zinc Plated / Hot-Dip Galvanized / Dacromet | Iska caabbinta daxalka ikhtiyaari ah |
| Dulqaad | Mawduuca saxda ah | Iyadoo la raacayo heerarka |
| Codsiga | Mishiino / Qalab / Qaab-dhismeedka Birta / Gawaarida | Xoog sare leh |
| Shahaadada | MTC / ISO / SGS | Kormeerka dhinac saddexaad ayaa diyaar ah |
| Baakad | Kartoon / Baakad / Jumlo | Dhoofinta baakadaha caadiga ah |
| Waqtiga Bixinta | 7–15 Maalmood | Iyadoo ku xiran tirada |
Kor u qaadista Indhaha Bolt
| Shay | Faahfaahinta | Faahfaahinta |
|---|---|---|
| Magaca Badeecada | Kor u qaadista Indhaha Bolt | Bool Isha / Giraanta Qaadista |
| Heerka Caadiga ah | DIN / ASTM / ASME | DIN580, ASTM A489, ASME B18.15 |
| Cabbirka (Dhexdhexaadka) | M6 - M64 | 1/4” – 2-1/2” |
| Nooca Mawduuca | Mitir / UNC / UNF | Mawduuca oo dhammaystiran |
| Alaab | Bir Kaarboon / Bir Daawaha / Bir aan Daxal lahayn | 304 / 316 ikhtiyaari ah |
| Heerka Xoogga | 4.8 / 8.8 / 10.9 | Isticmaalka kor u qaadista xoogga sare |
| Xadka Culayska Shaqada (WLL) | 0.05 – 10 Tan | Waxay ku xiran tahay cabbirka iyo jihada |
| Daaweynta Dusha Sare | Zinc Plated / Hot-Mir la galvanized / Madow | Ikhtiyaarada ka hortagga daxalka |
| Nooca Indhaha | Isha Wareega ee Caadiga ah | Naqshad isku dhafan oo la sameeyay |
| Codsiga | Qaadista / Qalabka lagu rakibayo / Kor u qaadista | Mashiinno, dhisme, badda |
| Kala duwanaanshaha Heerkulka | -20°C ilaa 200°C | Waxay ku xiran tahay agabka |
| Shahaadada | MTC / ISO / SGS | Tijaabada rarka ayaa diyaar ah |
| Baakad | Kartoon / Kiiska Alwaax / Baakad | Heerka dhoofinta |
| Waqtiga Bixinta | 7–15 Maalmood | Iyada oo ku saleysan tirada dalabka |
Ballaarinta Bolt
| Shay | Faahfaahinta | Faahfaahinta |
|---|---|---|
| Magaca Badeecada | Ballaarinta Bolt | Barroosinka / Barroosinka Ballaarinta |
| Nooca | Barroosinka Gacanta / Barroosinka Wajiga / Barroosinka Gaashaanka | Noocyo badan ayaa la heli karaa |
| Heerka Caadiga ah | DIN / ASTM / ISO | DIN933, ASTM F1554 (tixraac) |
| Dhexroorka (Cabbirka) | M6 - M24 | 1/4” – 1” |
| Dhererka | 40 mm – 300 mm | Dhererka gaarka ah ayaa la heli karaa |
| Nooca Mawduuca | Metric / UNC | Mawduuca oo dhammaystiran |
| Alaab | Bir Kaarboon / Bir aan Daxal lahayn | SS304 / SS316 ikhtiyaari ah |
| Heerka Xoogga | 4.8 / 5.8 / 8.8 | Ikhtiyaarada culus ee la heli karo |
| Daaweynta Dusha Sare | Zinc Plated / Hot-Dip Galvanized / Dacromet | Iska caabbinta daxalka |
| Nooca Hagaajinta | Ballaarinta Farsamada | Xoog barroosin oo xooggan |
| Habka Rakibaadda | God hore loo qoday + adkeyn | Rakibaadda fudud |
| Codsiga | Shubid / Leben / Dhisme | Dhismaha iyo hagaajinta qaab-dhismeedka |
| Awoodda Xamuulka | Waxay ku xiran tahay cabbirka iyo walxaha salka | Taageero farsamo ayaa la heli karaa |
| Shahaadada | MTC / ISO / SGS | Tijaabo dhinac saddexaad ah oo ikhtiyaari ah |
| Baakad | Kartoon / Baakad / Jumlo | Heerka dhoofinta |
| Waqtiga Bixinta | 7–15 Maalmood | Iyada oo ku saleysan tirada |
Codsiga
Baakadaha alaabta
Waxaan marinaa filim balaastig ah oo aan biyuhu celin karin, waxaanan isticmaalnaa kartoonno jiingado leh ama kiisas alwaax ah si aan u ilaalino qoyaanka, saameynta iyo dhaawaca gaadiidka. Xalalka baakadaha ee la habeeyey ayaa sidoo kale la bixin karaa iyadoo loo eegayo shuruudaha macaamiisha.
Hababka keenista gaadiidka waxaa loo habeeyey sida soo socota: badda, hawada degdega ah ee tirada yar iyo miisaanka oo ay ku jiraan rarista konteenarada, rarista dhulka fidsan ama xamuulka badan. Waxaan u habeynaa saadka si waafaqsan waqtiga keenista, kharashka iyo shuruudaha meesha loo socdo waxaanan hubineynaa keenista si ammaan ah oo waqtigeeda ku habboon.
Xaaladda wax soo saarka iyo kaydinta
ROYAL GROUP OO LA AASAASAY 2012, WAA GANACSI TIKNAAD SARE OO KU TAKHASUUSAY HORUMARINTA, SOO SAARKA IYO IIBKA ALAABTA DHISMAHA. XARUNTA WAXAY KU TAALAA MAGAALADA TIANJIN—MAGAALO DHEXE OO SHIINE AH IYO MID KA MID AH MAGAALOOYINKII UGU HORREEYAY EE XEEBTA FURAN. LAAMAHA WAXAY KU JIRAA DADWEYNAHA.
SHIRKADEENU WAXAY BIXISAA BADAN OO BADEECADO XIRAYA, OO U ADEEGTA WARSHADO IYO CODSIYO KALA DUWAN. HADDII AAD U BAAHAN TAHAY BOOLLO, BOLTS, LOWS, MASHIIN, AMA NOOC KALE OO KALE OO XIRAYA, WAAN KU DABOOLNAA. LA XIRIIR QAALIYAHA TAKHASUSKA
Waxaan leenahay in ka badan toban sano oo waayo-aragnimo ah oo ku saabsan boolal, laws, iyo qaybo kale oo adag. Waxaan bixin karnaa alaab leh heerar kala duwan sida DIN, JIS, ANSI, iwm., waxaanan macaamiisha u habeyn karnaa qalabka loo baahan yahay iyadoo lagu saleynayo sawirrada iyo muunadaha. Badeecadahayaga Waxaa loo iibiyaa in ka badan 100 waddan oo adduunka ah.
rarida
Su'aalaha Badiya La Weydiiyo
S1: Ma bixin kartaa badeecooyin gaar ah oo ku salaysan sawirradeenna?
Haa, waxaan taageernaa habayn buuxda iyadoo loo eegayo sawirradaada ama shuruudaha farsamada. Kooxdayada injineerinka ayaa sidoo kale kaa caawin kara hagaajinta naqshadeynta.
S2: Agab iyo heerar noocee ah ayaad bixisaan?
Waxaan bixinaa badeecooyin ka samaysan bir kaarboon, bir daawaha, iyo bir aan daawaha lahayn, annagoo raacayna heerarka caalamiga ah sida ASTM, EN, DIN, iyo ISO.
Q3: Waa maxay waqtiga keenistaadu?
Dalabyada caadiga ah waxaa badanaa la keenaa 7-15 maalmood gudahood. Alaabada la habeeyey waxay qaadan kartaa 15-25 maalmood iyadoo ku xiran qeexitaannada iyo tirada.
S4: Ma bixisaa shahaadooyin tayo leh?
Haa, waxaan bixinaa Shahaadooyinka Imtixaanka Mill (MTC), iyo sidoo kale warbixinnada kormeerka dhinac saddexaad sida SGS haddii loo baahdo.
Q5: Waa maxay shuruudaha lacag bixintaada?
Waxaan aqbalnaa T/T, L/C, iyo shuruudo kale oo lacag bixin dabacsan oo ku salaysan shuruudaha dalabka.
