EN I Beams waa qaybo bir ah oo qaab-dhismeed oo Yurub ah oo heer sare ah oo leh culeys adag, iska caabin wanaagsan oo loo qabo leexashada iyo dhaqan dheer oo loo isticmaalo naqshadeynta dhismayaasha iyo dhismayaasha injineernimada.
Qaab-dhismeedka Birta Yurub EN S275JR I beam
| Hantida | Faahfaahinta / Faahfaahinta |
|---|---|
| Heerka Agabka | EN S275JR |
| Xoogga Wax Soo Saarka | ≥275 MPa |
| Cabbirrada | IPE 80–IPE 600 / IPN 80–IPN 550 |
| Dhererka | Heerka: 6 m / 12 m |
| Dulqaadka Cabbirka | Qaybaha qaab-dhismeedka I ee kulul ee la duubay waxay u hoggaansamaan EN 10034 |
| Shahaadada Tayada | SGS, BV, ISO |
| Dhammaadka Dusha Sare | Bir madow, oo kululaynaysa |
| Codsiyada | Qaab-dhismeedyo waaweyn, alwaaxyo culays qaada, dhismayaal warshadeed, buundooyin |
| Kaarboon u dhiganta (Ceq) | ≤0.47% |
| Tayada Dusha Sare | Si siman, ka xor ah dildilaaca iyo lakabka; dulqaadka toosan ≤2 mm/m |
| Hantida | Faahfaahinta | Sharaxaad |
|---|---|---|
| Xoogga Wax Soo Saarka | ≥275 MPa | Taas oo birtu ay bilaabato isbeddel joogto ah |
| Xoogga Tijaabada | 410–560 MPa | Culayska ugu badan ee jiidista birta ayaa u adkeysan karta ka hor jabka |
| Kordhinta | ≥20% | Qaab-dhismeedka balaastikada ee lagu cabbiray dhererka cabbirka caadiga ah |
| Adkaanta (Brinell) | 120–160 HB | Birta qaab-dhismeedka S275JR |
| Kaarboon (C) | ≤0.20% | Waxay hubisaa alxanka wanaagsan iyo adkeysiga |
| Manganese (Mn) | 0.60–1.50% | Waxay xoojisaa xoogga iyo iska caabbinta saameynta |
| Sulfur (S) | ≤0.035% | Sulfur yar wuxuu hagaajiyaa isku-xidhka |
| Fosfooraska (P) | ≤0.035% | Fosfooraska oo hooseeya wuxuu hagaajiyaa adkeysiga iyo tayada alxanka |
| Silikoon (Si) | ≤0.50% | Xoojinta walxaha iyo waxay ka caawisaa deoksaydhka inta lagu jiro sameynta birta |
| Shay | Miisaanka (kg/m) | Qoto dheer (mm) | Ballaca (mm) | Dhumucda shabakadda (mm) | Dhumucda flange-ka (mm) |
|---|---|---|---|---|---|
| IPE 80 | 6.0 | 80 | 46 | 3.8 | 5.2 |
| IPE 100 | 8.1 | 100 | 55 | 4.1 | 5.7 |
| IPE 120 | 10.4 | 120 | 64 | 4.4 | 6.3 |
| IPE 140 | 12.9 | 140 | 73 | 4.7 | 6.9 |
| IPE 160 | 15.8 | 160 | 82 | 5.0 | 7.4 |
| IPE 180 | 18.8 | 180 | 91 | 5.3 | 8.0 |
| IPE 200 | 22.4 | 200 | 100 | 5.6 | 8.5 |
| IPE 220 | 26.2 | 220 | 110 | 5.9 | 9.2 |
| IPE 240 | 30.7 | 240 | 120 | 6.2 | 9.8 |
| IPE 270 | 36.1 | 270 | 135 | 6.6 | 10.2 |
| IPE 300 | 42.2 | 300 | 150 | 7.1 | 10.7 |
| IPE 330 | 49.1 | 330 | 160 | 7.5 | 11.5 |
| IPE 360 | 57.1 | 360 | 170 | 8 | 12.7 |
| IPE 400 | 66.3 | 400 | 180 | 8.6 | 13.6 |
| IPE 450 | 79.1 | 450 | 190 | 9.4 | 14.6 |
| IPE 500 | 90.7 | 500 | 200 | 10.2 | 16 |
| IPE 550 | 106.0 | 550 | 210 | 11.2 | 17.2 |
| IPE 600 | 124.4 | 600 | 220 | 12 | 19 |
| Shay | Miisaanka (kg/m) | Qoto dheer (mm) | Ballaca (mm) | Dhumucda shabakadda (mm) | Dhumucda flange-ka (mm) |
|---|---|---|---|---|---|
| IPN 80 | 5.9 | 80 | 42 | 3.9 | 5.9 |
| IPN 100 | 8.3 | 100 | 50 | 4.5 | 6.8 |
| IPN 120 | 11.1 | 120 | 58 | 5.1 | 7.7 |
| IPN 140 | 14.3 | 140 | 66 | 5.7 | 8.6 |
| IPN 160 | 17.9 | 160 | 74 | 6.3 | 9.5 |
| IPN 180 | 21.9 | 180 | 82 | 6.9 | 10.4 |
| IPN 200 | 26.2 | 200 | 90 | 7.5 | 11.3 |
| IPN 220 | 31.1 | 220 | 98 | 8.1 | 12.2 |
| IPN 240 | 36.2 | 240 | 106 | 8.7 | 13.1 |
| IPN 260 | 41.9 | 260 | 113 | 9.4 | 14.1 |
| IPN280 | 47.9 | 280 | 119 | 10.1 | 15.2 |
| IPN 300 | 54.2 | 300 | 125 | 10.8 | 16.2 |
| IPN320 | 61.0 | 320 | 131 | 11.5 | 17.3 |
| IPN 340 | 68.0 | 340 | 137 | 12.2 | 18.3 |
| IPN 360 | 76.1 | 360 | 143 | 13 | 19.5 |
| IPN 400 | 92.4 | 400 | 155 | 14.4 | 21.6 |
| IPN 450 | 115 | 450 | 170 | 16.2 | 24.3 |
| IPN 500 | 141 | 500 | 185 | 18 | 27 |
| IPN 550 | 166 | 550 | 200 | 19 | 30 |
| IPN 600 | 199 | 600 | 215 | 21.6 | 32.4f |
Madow kulul oo la duubay
Galvanizing kulul
Dahaarka
Alwaaxyo iyo tiirar loogu talagalay dhismayaasha:Dhismaha dhaadheer, warshadaha, meelaha lagu kaydiyo iyo buundooyinka kuwaas oo u shaqeeya sida xubnaha ugu muhiimsan ee qaada culayska.
Injineernimada Buundada: Xubnaha taageerada ugu weyn ama kuwa labaad ee buundooyinka baabuurta iyo kuwa dadka lugeynaya.
Qalabka Culus & Taageerada Warshadaha: Taageerada qalabka culus, iyo taageerada warshadaha.
Xoojinta Dhismaha: Dib-u-habeyn ama horumarin dhisme ama qaab-dhismeed jira oo u oggolaanaya inuu qaado culaysyo ama daqiiqado dheeraad ah.
Qaab-dhismeedka Dhismaha
Injineernimada Buundada
Taageerada Qalabka Warshadaha
Xoojinta Dhismaha
1) Xafiiska Laanta - Taageerada ku hadasha Isbaanishka.
2) In ka badan 5,000 oo tan oo kayd ah ayaa ku jira kaydka, oo leh cabbirro kala duwan
3) Waxaa baaraya hay'ado awood leh sida CCIC, SGS, BV, iyo TUV, iyadoo la adeegsanayo baakado caadi ah oo badda ku habboon.
Baakad
Alwaaxyada I-ga waxaa ku jira tarpaulin iyo 2 ilaa 3 xabbo oo qalajin ah; Go'yaasha tarpaulin-ka ee kulaylka xira, oo biyuhu aanay celin karin ayaa roobka ka ilaaliya iftiinka I-ga.
Xirmo amni: Xarig bir ah oo 12 - 16 mm ah ayaa lagu duubay xidhmo kasta; wuxuu u fiican yahay 2-3 tan wuxuuna leeyahay qalab kor u qaadis oo nala jaan qaadi kara.
Calaamadayn cad: Calaamadaha laba-luqadlaha ah (Ingiriis iyo Isbaanish) oo ay ku jiraan darajada, qeexitaannada iyo koodhka HS, lambarka dufcadda iyo tixraaca imtixaanka.
Ilaalinta Astaamaha Sare: Laba maro iyo lakab saliid ah oo loogu talagalay alwaaxyada I ≥800mm.
Bixinta
Raritaanka oo lagu kalsoon yahay: Iskaashiga shirkadaha xamuulka qaada ee ugu fiican (MSK, MSC, COSCO iwm) ee badmaaxida badbaadada leh.
Xakamaynta Tayada: Waxaad hubin kartaa in alwaaxdu ay si aan boodh lahayn u nuugaan oo ay soo gaari doonaan iyagoon wax dhaawac ah gaarin, taasoo la macno ah inaad filan karto shaqo aan dhib lahayn.
S1: Waa maxay faraqa u dhexeeya iftiinka IPE iyo IPN?
Alwaaxyada IPE waxay leeyihiin wejiyo flange ah oo is barbar socda oo leh dhumuc isku mid ah, halka alwaaxyada IPN ay leeyihiin flanges jilicsan. Alwaaxyada IPE waxaa si badan loo isticmaalaa sababtoo ah hufnaan farsamo oo wanaagsan iyo naqshad isku xidh oo fudud.
Q2: Waa maxay cabbirrada la heli karo?
Alwaaxyada IPE iyo IPN waxaa laga heli karaa cabbirro kala duwan oo caadi ah (IPE 80–600, IPN 80–360). Cabbirrada iyo dhererka gaarka ah ayaa sidoo kale la bixin karaa iyadoo loo eegayo shuruudaha mashruuca.
S3: Ma bixin kartaa shahaadooyin tayo leh?
Haa. Shahaadooyinka Imtixaanka Mill (MTC) ayaa la bixiyaa dufcad kasta. Warbixinnada kormeerka ee dhinac saddexaad (SGS, BV, iwm.) ayaa sidoo kale la heli karaa marka la codsado.
S4: Ma bixin kartaa shahaadooyin tayo leh?
Haa. Shahaadooyinka Imtixaanka Mill (MTC) ayaa la bixiyaa dufcad kasta. Warbixinnada kormeerka ee dhinac saddexaad (SGS, BV, iwm.) ayaa sidoo kale la heli karaa marka la codsado.
Q5: Waa maxay shuruudaha keenista iyo waqtiga hogaaminta?
Waxaan taageernaa shuruudaha FOB, CFR, CIF, iyo EXW. Waqtiga keenistu wuxuu caadi ahaan u dhexeeyaa 5-10 maalmood oo loogu talagalay alaabta iyo 15-30 maalmood oo loogu talagalay dalabaadka wax soo saarka.
Cinwaanka
Bl20, Shanghecheng, Shuangjie Street, Degmada Beichen, Tianjin, Shiinaha
Iimayl
Telefoon
+86 13652091506
Halkan ku qor fariintaada oo noo soo dir
