S355 Nooca U ee Foornada leh ee Birta Duuban ee Kulul

Sawirka Shaqsiga ah ee S355 U Nooca Buuxa ee Birta Duuban ee Kulul
  • S355 Nooca U ee Foornada leh ee Birta Duuban ee Kulul
  • S355 Nooca U ee Foornada leh ee Birta Duuban ee Kulul
  • S355 Nooca U ee Foornada leh ee Birta Duuban ee Kulul
  • S355 Nooca U ee Foornada leh ee Birta Duuban ee Kulul
  • S355 Nooca U ee Foornada leh ee Birta Duuban ee Kulul
  • S355 Nooca U ee Foornada leh ee Birta Duuban ee Kulul

Sharaxaad Gaaban:

Tuubada Xaashida Birta ah ee S355waa badeeco bir ah oo qaab dhismeed oo xoog badan leh oo si weyn loogu isticmaalo injineernimada madaniga iyo badda.

Iyada oo leh xoog wax soo saar oo heer sare ah, adkeysi, iyo waxqabadka alxanka, waxay ku habboon tahay ilaalinta darbiyada, aasaaska qoto dheer, godka kaydka, dhismayaasha dekedaha, iyo dhismaha xeebta.

Waxay bixisaa awood culeys oo heer sare ah iyo cimri dherer dheer oo ku aaddan jawiga carrada iyo biyaha ee baahida badan leh.


  • Heerka Birta:Q235B Q355B S355
  • Heerka wax soo saarka:GB/EN
  • Muddada Lacag-bixinta:30%TT+70%
  • Waqtiga Bixinta:7-15 Maalmood
  • Shahaadada:ISO 9001, MTC, SGS
    • Noo soo dir emayl WhatsApp

    Faahfaahinta Badeecada

    Calaamadaha Alaabta

    Faahfaahinta Badeecada

    Heerka Caadiga ah GB/EN Biilasha Miisaanka Dhabta ah
    Dulqaad Midna ma jiro Waqtiga Bixinta 7 ~ 15 maalmood
    Daawaha ama Maya Midna ma jiro Fasal S235/S275/S355
    Adeegga Habaynta OEM Meesha Asalka ah Tinajin, Shiinaha
    https://www.chinaroyalsteel.com/contact-us/
    https://www.chinaroyalsteel.com/contact-us/
    https://www.chinaroyalsteel.com/contact-us/
    https://www.chinaroyalsteel.com/contact-us/
    Hubi Saamiyada ugu dambeeyay & Qiimaha

    Halabuurka Kiimikada ee Tuubada Birta ah

    Heerka Birta C (%) Si (%) Mn (%) B (%) S (%) N (%) Cu (%)
    S355 ≤ 0.24 ≤ 0.55 ≤ 1.60 ≤ 0.035 ≤ 0.035 ≤ 0.012 ≤ 0.55*

    Fiiro gaar ah: Cu (Naxaas) waa ikhtiyaari iyadoo ku xiran qeexitaanka iska caabbinta daxalka ee la hagaajiyay. Qiimayaashu way kala duwanaan karaan wax yar iyadoo loo eegayo soo saaraha iyo nooca qaybta. Shahaadada Imtixaanka Warshadda (MTC) ayaa la heli karaa marka la codsado.

    Guryaha Farsamada ee Tuulada Birta ah

    Heerka Birta Dhumuc (mm) Xoogga Wax Soo Saarka (ReH) MPa Xoogga Laabista (Rm) MPa Kordhinta (%)
    S355JR ≤ 16 ≥ 355 470 - 630 ≥ 22
    S355JR 16 – 40 ≥ 345 470 - 630 ≥ 22
    S355JR 40 – 63 ≥ 335 470 - 630 ≥ 21
    S355JR 63 - 80 ≥ 325 470 - 630 ≥ 20

    Fiiro gaar ah:Sifooyinka farsamada way kala duwan yihiin iyadoo ku xiran dhumucda iyo habka wax soo saarka. Qiimayaashu waxay ku salaysan yihiin shuruudaha heerka EN. Shahaadada Imtixaanka Mill (MTC) waxaa la bixin karaa marka la codsado.

    Cabbirka Tuubada Xaashida Birta ah

    Noocyada Tuurista Xaashida ee Nooca Aasiya
    Tuubada xaashida Yurub ee Larssen
    Noocyada Tuurista Xaashida ee Nooca Aasiya
    qaybta Cabbirrada Aagga Qaybaha Cusbo Daqiiqad
    ee firfircoonida    		 Modulus
    qaybta
    Ballaca Dhererka Dhumucda Tuulmo Derbiga
    w h t
    mm Mm mm cm2/tuubo kg/m kg/m2 cm4/m cm3/m
    ⅠA 400 85 8 45.21 35.5 88.8 4500 529
    Ⅱ 400 100 10.5 61.2 48 120 8740 874
    Ⅲ 400 125 13 76.4 60 150 16800 1340
    ⅢA 400 150 13.1 74.4 58.4 146 22800 1520
    Ⅳ 400 170 15.5 97 76.1 190 38600 2270
    ⅤL 500 200 24.3 133.8 105 210 63000 3150
    ⅥL 500 225 27.6 153 120 240 86000 3820
    ⅡW 600 130 10.3 78.7 61.8 103 13000 1000
    ⅢW 600 180 13.4 104 81.6 136 32400 1800
    ⅣW 600 210 18 135.3 106 177 56700 2700
    Tuubada xaashida Yurub ee Larssen
    Qaybta Cabbirrada Cusbo Daqiiqadda firfircoonida Qaybta qaybta
    Ballaca Dhererka Dhumucda Tuul kasta Derbiga
    w h t s
    mm mm mm mm kg/m kg/m2 cm4/m cm3/m
    Ballaca 750mm
    GHU 14 750 408 10.0 8.3 77.9 104 28 690 1 415
    GHU 16 750 411 11.5 9.3 86.3 115 32 860 1 610
    GHU 18 750 441 10.5 9.1 88.5 118 39 310 1 790
    GHU 20 750 444 12.0 10.0 96.9 129 44 450 2010
    GHU 23 750 447 13.0 9.5 102.1 136 50 710 2 280
    GHU 25 750 450 14.5 10.2 110.4 147 56 250 2 510
    Ballaca 600mm
    GHU 12 600 360 9.8 9.0 66.1 110 21 610 1 210
    GHU 12S 600 360 10.0 10.0 71.0 118 22 670 1 270
    GHU 18-1 600 430 10.2 8.4 72.6 121 35 960 1 680
    GHU 18 600 430 11.2 9.0 76.9 128 38 660 1 810
    GHU 18+1 600 430 12.2 9.5 81.1 135 41 330 1930
    GHU 22-1 600 450 11.1 9.0 81.9 137 46 390 2070
    GHU 22 600 450 12.1 9.5 86.1 144 49 470 2 210
    GHU 22+1 600 450 13.1 10.0 90.4 151 52 520 2 345
    GHU 28-1 600 452 14.2 9.7 97.4 162 60 590 2 690
    GHU 28 600 454 15.2 10.1 101.8 170 64 470 2850
    GHU 28+1 600 456 16.2 10.5 106.2 177 68 390 3010
    GHU 32-1 600 452 18.5 10.6 109.9 183 69 220 3075
    GHU 32 600 452 19.5 11.0 114.1 190 72 330 3 210
    GHU 32+1 600 452 20.5 11.4 118.4 197 75 410 3 350
    600mm iyo 400mm ballac
    GHU 6N 600 309 6.0 6.0 41.9 70 9 680 635
    GHU 7N 600 310 6.5 6.4 44.1 74 10 460 685
    GHU 7S 600 311 7.2 6.9 46.3 77 11 550 750
    GHU 7HWS 600 312 7.3 6.9 47.4 79 11 630 755
    GHU 8N 600 312 7.5 7.1 48.5 81 12 020 780
    GHU 8S 600 313 8.0 7.5 50.8 85 12 810 830
    GHU 10N 600 316 9.0 6.8 55.8 93 15 710 1000
    GHU 11N 600 318 10.0 7.4 60.2 100 17 460 1 105
    GHU 12N 600 320 11.0 8.0 64.6 108 19 230 1 230
    GHU 13N 600 418 9.0 7.4 59.9 100 26 600 1 280
    GHU 14N 600 420 10.0 8.0 64.3 107 29 420 1 410
    GHU 15N 600 422 11.0 8.6 68.7 115 32 270 1 540
    GHU 16N 600 430 10.2 8.4 72.6 121 35 960 1 680
    GHU 18N 600 430 11.2 9.0 76.9 128 38 660 1 810
    GHU 20N 600 430 12.2 9.5 81.1 135 41 310 1930
    GHU 21N 600 450 11.1 9.0 81.9 137 46 390 2070
    GHU 22N 600 450 12.1 9.5 86.1 144 49 470 2 210
    GHU 23N 600 450 13.1 10.0 90.4 151 52 520 2 345
    GHU 27N 600 452 14.2 9.7 97.4 162 60 590 2 690
    GHU 28N 600 454 15.2 10.1 101.8 170 64 470 2850
    GHU 30N 600 456 16.2 10.5 106.2 177 68 390 3010
    GHU 31N 600 452 18.5 10.6 109.9 183 69 220 3075
    GHU 32N 600 452 19.5 11.0 114.1 190 72 330 3 210
    GHU 33N 600 452 20.5 11.4 118.4 197 75 420 3 350
    GHU 16-400 400 290 12.7 9.4 62.0 155 22 600 1 570
    GHU 18-400 400 292 15.0 9.7 69.3 173 26 100 1 795

     

    Qaybta Cabbirrada Cusbo Daqiiqadda firfircoonida Qaybta qaybta
    Ballaca Dhererka Dhumucda Tuul kasta Derbiga
    w h t s
    mm mm mm mm kg/m kg/m2 cm4/m cm3/m
    GHL 600 600 150 9.5 9.5 56.4 94 3825 510
    GHL 600K 600 150 10 10 59.4 99 4050 540
    GHL 601 600 310 7.5 6,4 46.8 78 11520 745
    GHL 602 600 310 8.2 8 53.4 89 12870 830
    GHL 603 600 310 9.7 8.2 64.8 108 18600 1200
    GHL 603K 600 310 10 9 68.1 113.5 19220 1240
    GHL 603 10/10 600 310 10 10 69.6 116 19530 1260
    GHL 604 600 380 10 9 73.8 123 30400 1600
    GHL 605 600 420 13 9.2 85.5 142.5 43890 2090
    GHL 606 600 435 14.4 9.2 94.2 157 54375 2500
    GHL 607 600 452 19 10.6 114 190 72320 3200
    GHL 703 700 400 9.5 8 67.5 96.4 24200 1210
    GHL 716 700 440 10.2 9.5 79.9 114.2 35200 1600
    GHL 720 750 450 12 10 96.4 128.5 45000 2000

    Soo dejiso Buug-yaraha oo Dhamaystiran

    Ma taqaanaa wax badan oo ku saabsan qeexitaannada iyo cabbirrada tuulmooyinka xaashida birta ah?

    GUJI HALKAN

    Qufulka Tuubada Birta ah iyo waxqabadka biyuhu aanay

    bir-galvanized-bir-xaashi-tuubbo1

    Naqshadeynta: Tuulmo Xaashi Bir ah oo Isku Xidhan, awood u yeelashada ≤1×10⁻⁷ cm/s

    Ameerika: Waxay u hoggaansan tahay Heerka ASTM D5887 ee loogu talagalay Dahaarka si loo yareeyo seedaha hoostiisa Durbaanka.

    Koonfur-bari Aasiya: Biyaha dhulka hoostiisa ku jira oo u adkeysan kara xilliyada roobka ee kulaylaha

    Habka Wax Soo Saarka Tuubada Birta ah

    Soo saarista tuulmooyinka xaashida birta ah waxaa lagu sameeyaa hab kulul oo la xakameeyey si loo hubiyo xoog sare, waxqabad sax ah oo isku xiran, iyo tayo joogto ah.

    1. Xulashada Walxaha Cayriin
    Billets bir ah oo tayo sare leh (sida S235, S275, S355) ayaa la soo xulaa oo la hubiyaa si loo ogaado halabuurka kiimikada iyo tayada gudaha.

    2. Habka Kululaynta
    Billet-yada waxaa lagu kululeeyaa foorno dib u kululayn ah ilaa heerkul sare si loo gaaro dabacsanaan ugu fiican oo lagu rogo.

    3. Samaynta Duubista Kulul
    Birta kulul waxaa loo maraa taxane ah mashiinno duuban si ay si tartiib tartiib ah u sameeyaan astaanta loo baahan yahay ee xaashida (nooca U, nooca Z, ama qaybaha shabakadda tooska ah).

    4. Samaynta Isku-xidhka
    Qalabka duubista saxda ah wuxuu sameeyaa nidaamka isku xidhka, isagoo hubinaya isku xidhka adag ee u dhexeeya tuulmooyinka ku xiga si loo helo biyo waxtar leh iyo ilaalinta ciidda.

    5. Habka Qaboojinta
    Tuubooyinka xaashida la sameeyay ayaa lagu qaboojiyaa xaaladaha la xakameeyey si loo xasiliyo sifooyinka farsamada loona hortago isbeddelka.

    6. Toosinta iyo Jaritaanka
    Tuubooyinka waa la toosiyaa, loo gooyaa dhererka loo baahan yahay, waxaana la hubiyaa saxnaanta cabbirka iyo u hoggaansanaanta dulqaadka.

    7. Daawaynta Dusha Sare (Ikhtiyaar)
    Xulashooyinka waxaa ka mid ah dahaarka kulul ee lagu dhejiyo, rinjiyeynta, ama dahaarka ka hortagga daxalka si loo xoojiyo cimri dhererka jawiga badda iyo dhulka hoostiisa.

    8. Kormeerka Tayada
    Kormeerka kama dambaysta ah waxaa ka mid ah tijaabinta cabbirka, kormeerka muuqaalka, iyo xaqiijinta hantida farsamada sida waafaqsan heerarka EN / ASTM.

    9. Baakadeynta iyo Rarista
    Badeecadaha waa la xirxiraa, la calaamadeeyaa, waxaana loo diyaariyaa baakadaha dhoofinta badda iyo rarista caalamiga ah.

    Hawshani waxay hubinaysaa xoog sare, waxqabad isku xiran oo la isku halleyn karo, iyo cimri dheer oo adeeg ah oo loogu talagalay codsiyada dhismaha, injineernimada badda, iyo aasaaska.

    tuulmo bir ah Habka wax soo saarka

    Dusha sare ee Tuubada Birta ah

    u_ (1)
    112

    AmeerikaDahaarka HDG waxaa loo sameeyaa si uu u buuxiyo shuruudaha ASTM A123/ISO 1461, iyadoo dhumucdiisu ugu yar tahay dahaarka zinc ≥ 85 μm si loo helo iska caabin wanaagsan oo daxalka ah iyo cimri dheer oo adeeg ah. Nidaamka dahaarka 3PE sidoo kale waa ikhtiyaari si loo helo ilaalin wanaagsan oo ka jirta deegaannada gardarrada leh sida badda iyo dhulka hoostiisa. Dhammaan habaynta dusha sare waa mid u hoggaansan RoHS waxayna buuxisaa heerarka caalamiga ah ee deegaanka iyo dhoofinta.

    Koonfur-bari Aasiya:Galvanization-ka kulul ee dhumucdiisu tahay ≥100 μm, oo ay weheliso nidaamka laba lakab oo dhuxul ah oo epoxy ah, wuxuu bixiyaa ilaalin daxaleed oo heer sare ah iyo waxqabad buufin milix ah oo ka badan 5,000 saacadood. Sidaa darteed, badeecadu waxay si gaar ah ugu habboon tahay deegaannada biyaha kulaylaha iyo kuwa adag ee daxalka waxayna siin kartaa adeeg dheer isticmaalaha codsiyada xeebaha iyo badda.

    CODSIGA

    Tuulmooyinka xaashida birta ah ayaa si ballaaran loogu adeegsaday injineernimada madaniga ah, injineernimada badda, iyo goobta kaabayaasha dhaqaalaha iyadoo leh xoog sare, adkeysi, iyo nidaam isku xiran oo wanaagsan.

    Qaab-dhismeedka Haysashada: Waxaa loo isticmaalaa darbiyada ilaalinta iyo codsiyada xasilloonida jiirada, waxaa la qoday dhulka hoostiisa si loo celiyo carrada.

    Biyaha iyo Hawlaha Badda: Waxaa loo oggol yahay derbiyada dekedda, terminaalka dekedda, derbiyada badda, biyaha jabaqda, iyo dhismayaasha ilaalinta xeebaha.

    Injineernimada Aasaaska Qoto dheer: Shaqooyinka qodista dhulka, saldhigyada buundooyinka, iyo qodista dhulka ee biyaha iyo codsiyada kale si loo kala saaro biyaha iyo ciidda.

    Mashruucyada Xakamaynta Daadadka: Loo shaqeeyay xakamaynta biyaha iyo ka ilaalinta biyaha webiga iyadoo la adeegsanayo dikes iyo xannibaado ka hortagga daadadka iyo sidoo kale ka daadinta biyaha.

    Dhismaha Kaabayaasha Dhaqaalaha: Adeegsiga alaabada ee godadka, waddooyinka waaweyn, tareenada, marinnada korontada dhulka hoostiisa mara, iyo meelaha kale ee dhismaha kaabayaasha dhaqaalaha si loogu taageero qaab-dhismeedka iyo ilaalinta dhulka waa tiro badan yihiin.

    Qaab-dhismeedyada Ku-meel-gaarka ah: Ku habboon nidaamyada taageerada qodista ku meel gaarka ah ee goobaha dhismaha, iyagoo bixinaya rakibid iyo ka saarid fudud.

    Tuubooyinka xaashida birta ah waxay hubiyaan in dhulka la ilaaliyo, biyaha oo la adkeeyo, iyo xasilloonida dhismaha ee muddada dheer ee shaqooyinka joogtada ah iyo kuwa ku meel gaarka ah labadaba.

    Tuubada xaashida birta ah ee qaabka U-qaabaysan ee kulul (5)

    Maxaad u Dooranaysaa Kooxda Birta Royal ee Tiirarka Xaashida Birta ah

    1. Awood Wax Soo Saar oo Xoog leh
    Royal Steel Group waxay maamushaa khadadka wax soo saarka ee horumarsan ee U Type iyoTuubooyinka Xaashida Birta ah ee Nooca Z, hubinta wax soo saar deggan, isku xirnaan sax ah, iyo tayo joogto ah oo loogu talagalay mashaariicda kaabayaasha dhaqaalaha ee baaxadda weyn.

    2. Kala duwanaanshaha Badeecadaha iyo Habaynta Badeecadaha
    Waxaan bixinaa noocyo badan oo ah tuulmooyin xaashi ah oo leh darajooyin kala duwan, dherer, dhumuc, iyo ikhtiyaarro ilaalin daxaleed, oo loogu talagalay dekedaha, buundooyinka, sanduuqyada kaydka, iyo shaqooyinka aasaaska.

    3. Wax soo saar degdeg ah & Bixinta Waqtiga
    Iyada oo la adeegsanayo awood wax soo saar oo deggan iyo jadwal hufan, waxaan taageernaa shuruudaha mashruuca degdegga ah waxaanan hubineynaa in shixnadaha caalamiga ah ee waqtiga ku habboon la keeno.

    4. Khibrad Mashruuc Caalami ah oo La Xaqiijiyay
    Tuubooyinka birta ah ee aan isticmaalno waxaa si weyn loogu isticmaalaa injineernimada badda, horumarinta kaabayaasha dhaqaalaha, nidaamyada xakamaynta daadadka, iyo dhismaha warshadaha ee Aasiya, Bariga Dhexe, Afrika, iyo Ameerika.

    5. Alaab-qeybiye Xalalka Birta Hal-Joog ah
    Marka laga soo tago tuulmooyinka xaashida, waxaan sidoo kale bixinnaa tuubooyin bir ah, alwaaxyo H ah, qaab-dhismeedyo bir ah, iyo badeecooyin la xiriira, annagoo bixinna xalal iibsi oo isku dhafan oo loogu talagalay macaamiisha caalamiga ah.

    Macaamiishu waxay yimaadaan warshadda si ay u baaraan tuulmooyinka birta ah
    bir bir ah oo bir ah oo bir ah oo bir ah oo shiinaha ah2 (1)
    bir bir ah oo bir ah oo bir ah oo shiinaha ah1 (1)
    HEL QIIMEYNTII UGU DAMBEYSAY 12 SAACADOOD GUDAHOOD

    BAAKADAHA IYO GEYNTA

    Tuubooyinka xaashida birta ah waxaa loo mariyaa taxane ah maarayn iyo qaadis si loo gaaro xaalad ammaan ah, deggan, oo aan waxyeello lahayn inta lagu jiro rarista iyo kaydinta.

    Xirmo kasta waxaa si adag ugu xiran xarig bir ah iyo ka hortagga isbeddelka.

    Khasaaraha, qoyaanka, iyo miridhku waxaa iska caabin kara daboollada ilaalinta iyo duubka lakab-lakab ah ee biyaha celin kara inta lagu jiro gaadiidka badda ee masaafada dheer.

    Baakadaha dhoofinta caadiga ah waxay qaataan qaab bir ah oo badda ku habboon ama baaldi alwaax ah, kaas oo ku habboon maraakiibta caalamiga ah.

    Tilmaamaha badeecada, heerka, cabbirka, iyo lambarka kulaylka ayaa si cad loogu daabacay xidhmo kasta si loo fududeeyo aqoonsiga.

    Xulashooyinka rarista ee dabacsan: Taageer rarista konteenarada iyo rarista maraakiibta waaweyn ee alaabtaada si loo hubiyo in si ammaan ah, hufan, iyo waqtigeeda loogu geeyo dekedaha adduunka oo dhan. Dukumentiyada dhoofinta iyo maaraynta saadka ayaa la bixiyaa si loo fududeeyo ganacsiga caalamiga ah.

    Tuubbo bir ah oo qaab U ah oo kulul oo la duubay (7)

    Su'aalaha Badiya La Weydiiyo

    S1: Sideed u hubisaa tayada tuulmooyinka birta ah?

    J: Waxaan si adag u raacnaa heerarka caalamiga ah sida EN 10025, ASTM, iyo JIS. Dufcad kasta waxaa la siiyaa Shahaadooyinka Imtixaanka Mill (MTC), warbixinnada kormeerka, iyo raad-raac buuxa.

    Q2: Ma heli karaa cabbirro gaar ah ama darajooyin bir ah?

    A: Haa, waxaan taageernaa cabbirrada la habeeyey, dhererka, iyo darajooyinka birta sida S235, S275, iyo S355 iyadoo loo eegayo shuruudaha mashruuca.

    S3: Sidee bay u xooggan yihiin tuulmooyinkaaga xaashida ah ee loogu talagalay isticmaalka badda ama aasaaska?

    A: Tuubooyinkayaga xaashida ah waxaa loogu talagalay xoog wax soo saar sare leh iyo waxqabad isku xiran oo heer sare ah, oo ku habboon ilaalinta derbiyada, dekedaha, sanduuqyada kaydka, iyo shaqooyinka aasaaska qoto dheer.

    S4: Waa maxay ilaalinta ka hortagga daxalka?

    A: Waxaan bixinaa galvanizing kulul, dahaarka epoxy, nidaamyada rinjiyeynta, iyo ikhtiyaarrada 3PE ee ka hortagga daxalka xaaladaha deegaanka ee kala duwan.

    Q5: Waa maxay wakhtiga keenista dalabaadka badan?

    A: Waqtiga hogaaminta wax soo saarka caadiga ah waa qiyaastii 15-30 maalmood oo shaqo, iyadoo ku xiran qeexitaanka iyo mugga dalabka.

  • Kii hore:
  • Xiga:
    • Halkan ku qor fariintaada oo noo soo dir

    Qaybaha alaabta