ASTM A572 Heerka 50 Jumbo Alwaaxyada Birta Dhismaha ee Culus ee Balaadhan ee Flange H-Beams

ASTM A572 Heerka 50 Jumbo Alwaaxyada Birta Dhismaha ee Culus ee Flange-ka Ballaaran ee H-Beams Sawirka Lagu Soo Bandhigay
  • ASTM A572 Heerka 50 Jumbo Alwaaxyada Birta Dhismaha ee Culus ee Balaadhan ee Flange H-Beams
  • ASTM A572 Heerka 50 Jumbo Alwaaxyada Birta Dhismaha ee Culus ee Balaadhan ee Flange H-Beams
  • ASTM A572 Heerka 50 Jumbo Alwaaxyada Birta Dhismaha ee Culus ee Balaadhan ee Flange H-Beams
  • ASTM A572 Heerka 50 Jumbo Alwaaxyada Birta Dhismaha ee Culus ee Balaadhan ee Flange H-Beams
  • ASTM A572 Heerka 50 Jumbo Alwaaxyada Birta Dhismaha ee Culus ee Balaadhan ee Flange H-Beams
  • ASTM A572 Heerka 50 Jumbo Alwaaxyada Birta Dhismaha ee Culus ee Balaadhan ee Flange H-Beams

Sharaxaad Gaaban:

ASTM A572 Heerka 50 Jumbo AlwaaxyadaWaxay ka tirsan yihiin qaybta birta Alloy-ga Hoose ee Xoogga Sare leh (HSLA) kaas oo ku habboon codsiyada halkaas oo looga baahan yahay iska caabbinta daxalka iyo xoog sare sida buundooyinka, dhismayaasha iyo dhismayaasha kale.


  • Meesha Asalka ah::Shiinaha
  • Magaca Summada::Kooxda Birta Royal
  • Shuruudaha Lacag-bixinta iyo Dhoofinta:Tirada Dalabka Ugu Yar: 5 tan
  • Faahfaahinta Baakadaha:Dhoofinta Baakadaha iyo Xirmooyinka Biyaha aan Biyo-galeyn iyo Sugidda
  • Waqtiga Bixinta:Kaydka ku jira ama 10-25 maalmood oo shaqo ah
  • Shuruudaha Lacag-bixinta::T/T, Western Union
  • Awoodda Bixinta:5000 tan bishiiba
    • Noo soo dir emayl WhatsApp

    Faahfaahinta Badeecada

    Calaamadaha Alaabta

    Hordhac Badeecada

    Shay Faahfaahinta
    Heerka Agabka ASTM A572 Fasalka 50 (Habka Dhismaha HSLA)
    Xoogga Wax Soo Saarka ≥ 345 MPa (50 ksi)
    Xoogga Tijaabada 450–620 MPa
    Qaybaha la heli karo W6×9, W8×10, W12×30, W14×43, W18, W21, W24, W27, W30, W36, Qaybaha Jumbo
    Dhererka Heerka 6 m & 12 m; Dhererka Gaarka ah ayaa la heli karaa
    Dulqaadka Cabbirka Waxay la jaanqaadaysaa ASTM A6 / A6M
    Shahaadada Tayada Shahaadada Imtixaanka Mill (EN 10204 3.1), ISO 9001, Kormeerka SGS / BV / TUV ayaa diyaar ah
    HEL XIGASHO

    Xogta Farsamada

    Shay Fasal Kaarboon, ugu badnaan,
    %    		 Manganese, ugu badnaan,
    %    		 Silikoon, ugu badnaan,
    %    		 Fosforusmax,
    %    		 Sulfur, ugu badnaan,
    %
    Alwaax bir ah oo A572 ah 42 0.21 1.35 0.40 0.04 0.05
    50 0.23 1.35 0.40 0.04 0.05
    55 0.25 1.35 0.40 0.04 0.05

    Hantida Farsamada ee ASTM A36/A992/A572 W-beam (ama H-beam)

    Shay Fasal Dhibcaha wax soo saarka, ksi[MPa] Xoogga jiidista, ugu yaraan, ksi[MPa]
    Alwaax bir ah oo A572 ah 42 42[290] 60[415]
    50 50[345] 65[450]
    55 55[380] 70[485]

     

    Cabbirrada H-beam ee ASTM A572 ee ballaaran - W Beam

    Magacaabista Qoto dheer h (in) Ballaca w (in) Dhumucda shabakadda (in) Aagga Qaybta (in²) Miisaanka (lb/ft) Ix (in⁴) Iy (in⁴) Wx (in³) Wy (in³)
    W 4×13 4.16 4.06 0.28 3.8 13 11.3 3.9 5.5 1.9
    W 5×16 5.01 5.00 0.24 4.7 16 21.3 7.5 8.5 3.0
    W 5×19 5.15 5.03 0.27 5.5 19 26.2 9.1 10.2 3.6
    W 6×12 6.03 4.00 0.23 3.6 12 22.1 3.0 7.3 1.5
    W 6×15 5.99 5.99 0.23 4.4 15 29.1 9.3 9.7 3.1
    W 6×16 6.28 4.03 0.26 4.7 16 32.1 4.4 10.2 2.2
    W 6×20 6.20 6.02 0.26 5.9 20 41.4 13.3 13.4 4.4
    W 6×25 6.38 6.08 0.32 7.3 25 53.4 17.1 16.7 5.6
    W 8×10 7.89 3.94 0.17 2.9 10 30.3 2.1 7.8 1.1
    W 8×13 7.99 4.00 0.23 3.8 13 39.6 2.7 9.9 1.4
    W 8×15 8.11 4.02 0.245 4.4 15 48.0 3.4 11.8 1.7
    W 8×18 8.14 5.25 0.23 5.3 18 61.9 8.0 15.2 3.0
    W 8×21 8.28 5.27 0.25 6.2 21 75.3 9.8 18.2 3.7
    W 8×24 7.93 6.495 0.245 7.1 24 82.8 18.3 20.9 5.6
    W 8×28 8.06 6.535 0.285 8.3 28 98.0 21.7 24.3 6.6
    W 8×31 8.00 7.995 0.285 9.1 31 110 37.1 27.5 9.3
    W 8×35 8.12 8.02 0.31 10.3 35 127 42.6 31.2 10.6
    W 8×40 8.25 8.07 0.36 11.7 40 146 49.1 35.5 12.2
    W 8×48 8.50 8.11 0.40 14.1 48 184 60.9 43.3 15.0
    W 8×58 8.75 8.22 0.51 17.1 58 228 75.1 52.0 18.3
    W 8×67 9.00 8.28 0.57 19.7 67 272 88.6 60.4 21.4
    W 10×12 9.87 3.96 0.19 3.5 12 53.8 2.2 10.9 1.1
    W 10×15 9.99 4.00 0.23 4.4 15 68.9 2.9 13.8 1.5
    W 10×17 10.11 4.01 0.24 5.0 17 81.9 3.6 16.2 1.8
    W 10×19 10.24 4.02 0.25 5.6 19 96.3 3.0 18.8 2.1
    W 10×22 10.17 5.75 0.24 6.5 22 118 11.4 23.2 4.0
    W 10×26 10.33 5.77 0.26 7.6 26 144 14.1 27.9 4.9
    W 10×30 10.47 5.81 0.30 8.84 30 170 16.7 32.4 5.8
    W 10×33 9.73 7.96 0.29 9.71 33 170 36.6 35.0 9.2
    W 10×39 9.92 7.985 0.315 11.5 39 209 45.0 42.1 11.3
    W 10×45 10.10 8.02 0.35 13.3 45 248 53.4 49.1 13.3
    W 10×49 9.98 10.00 0.34 14.4 49 272 93.4 54.6 18.7
    W 10×54 10.09 10.03 0.37 15.8 54 303 103 60.0 20.6
    W 10×60 10.22 10.08 0.42 17.6 60 341 116 66.7 23.0
    W 10×68 10.40 10.13 0.47 20.0 68 394 134 75.7 26.4
    W 10×77 10.60 10.19 0.53 22.6 77 455 154 85.9 30.1
    W 10×88 10.84 10.27 0.605 25.9 88 534 179 98.5 34.8
    W 10×100 11.10 10.34 0.68 29.4 100 623 207 112 40.0
    W 10×112 11.36 10.415 0.755 32.9 112 716 236 126 45.3

    Guji badhanka ku yaal Midig

    Soo dejiso Tilmaamaha iyo Cabbirka ugu dambeeyay ee iftiinka W.

    Halkan Guji

    Dhammaadka Dusha Sare

    kaarboon-bir-h-galmo
    galvanized-dusha-h-beam
    saliid-madow-dusha sare-h-beam-boqornimo

    Dusha Caadiga ah

    Dusha sare ee galvanized(dhumucda galvanizing-ka kulul ≥ 85μm, cimriga adeegga ilaa 15-20 sano),

    Dusha sare ee Saliidda Madow

    Codsiga ugu Weyn

    astm-a992-a572-h-beam-codsi-boqornimo-koox-2
    astm-a992-a572-h-beam-codsi-boqornimo-koox-birta-3

    Birta Dhismaha:Alwaaxyo iyo tiirar loogu talagalay xafiisyada dhaadheer, dhismayaasha guryaha iyo xarumaha wax laga iibsado; dhismayaasha aasaasiga ah iyo alwaaxyada wiishashka ee loogu talagalay warshadaha.

    Injineernimada buundada:Nidaamyada sagxadaha iyo dhismayaasha hoose ee buundooyinka waaweyn iyo kuwa dhexe ee waaweyn iyo kuwa tareenada.

    astm-a992-a572-h-beam-codsi-boqornimo-koox-4
    astm-a992-a572-h-beam-codsiga-boqornimada-birta-kooxda-1

    Injineernimada magaalada iyo takhasuska lehSida saldhigyada tareenka dhulka hoostiisa mara, hagaajinta marinnada dhuumaha magaalooyinka, saldhigyada wiishashka munaaradaha iyo hagaajinta dhismaha ku meel gaarka ah.

    Injineeriyadda Caalamiga ah:Badeecadahayaga waxaa loo sameeyay inay buuxiyaan heerarka Waqooyiga Ameerika iyo kuwa kale ee caalamiga ah ee naqshadeynta qaab-dhismeedka birta.

    Faa'iidada Kooxda Royal Steel (Maxay Royal Group uga duwan tahay macaamiisha Ameerika?)

    BOQORYAAL-GUATEMALA
    ASTM A36 balaca flange H alaab-qeybiyaha

    1) Xafiiska Laanta - Taageerada Isbaanishka, caawinta nadiifinta kastamka, iwm.

    2) Qiyaastii 5,000 oo tan oo kayd ah ayaa ku jira kaydka, oo leh cabbirro kala duwan

    BOQORYAAL-H-BEAM
    BOQORTOOYADA-H-BEAM-21

    3) Waxaa hubiya hay'adaha awoodda leh sida CCIC, SGS, BV, TUV iyagoo wata baakado caadi ah oo badda ku habboon.

    NALA SOO XIRIIR
    Sanduuqa Iftiinka ee Badhanka

    Xirmooyinka iyo Gaarsiinta

    Baakad

    • Waxaa lagu xiray suumanka birta ah

    • Dhoofi baakadaha badda ee caadiga ah

    • Koofiyado balaastig ah oo loogu talagalay dhammaadka alwaaxda (haddii loo baahdo)

    • Daboolid biyuhu aanay biyuhu karin ayaa la heli karaa marka la codsado

    Bixinta

    • Waqtiga Bixinta: 7-15 maalmood cabbirrada kaydka

    • 15-30 maalmood oo loogu talagalay dalabaadka la habeeyey

    • Dekadda Rarista: Shanghai / Tianjin / Qingdao (ama sida loogu baahdo)

    • Shuruudaha Maraakiibta: FOB, CFR, CIF ayaa la heli karaa

    H型钢发货1
    gaarsiinta h-beam

    Su'aalaha Badiya La Weydiiyo

    S1: Waa maxay xoogga wax-soo-saarka ugu yar ee ASTM A572 Fasalka 50?

    A:Xoogga wax-soo-saarka ugu yar waa50 ksi (345 MPa), oo bixiya xoog ka sarreeya ASTM A36.

    Q2: Waa maxay cabbirrada la heli karo?

    A:Waxaan bixinaa qaybaha caadiga ah ee W sidaW6–W36, oo ay ku jiraanalwaaxyo waaweynCabbirrada gaarka ah ayaa sidoo kale la heli karaa marka la codsado.

    S3: Waa maxay dhererka caadiga ah?

    A:Dhererka caadiga ah waa6 m iyo 12 mAdeegyada dhererka iyo jarista ee la habeeyey ayaa diyaar ah.

    S4: Ma bixisaa Shahaadooyinka Tijaabada Mill?

    A:Haa, waan bixinnaaMTC (EN 10204 3.1)iyo taageeridda kormeerrada dhinac saddexaad sidaSGS, BV, ama TUV.

    S5: Alwaaxyada ma la gubi karaa ama ma lagu dahaadhi karaa?

    A:Haa, waan bixinaarinjiyeynta kulul ee galvanizing, dahaarka koowaad, iyo rinjiyeynta epoxysida waafaqsan shuruudaha mashruuca.

  • Kii hore:
  • Xiga:
    • Halkan ku qor fariintaada oo noo soo dir

    Qaybaha alaabta