Soo dejiso Tilmaamaha iyo Cabbirka ugu dambeeyay ee iftiinka W.
CSA G40.20/G40.21 Qaab-dhismeedka Birta 44W 50A 50AT 70WT Birta Qaab-dhismeedka ah oo ballaaran oo leh Flange
Iyada oo leh qaab qaybeed oo la habeeyay iyo muuqaal flange ballaaran,Alwaaxyada qaabka Wwaxay leeyihiin xoog foorarsi oo sarreeya, awood qaadis culays iyo xasillooni dhismeed oo wanaagsan. Waxaa sidoo kale si weyn loogu isticmaalaa alwaaxyada aasaasiga ah, tiirarka, alwaaxyada dabaqa, alwaaxyada saqafka, qaybaha buundooyinka, iyo xubno kale oo dhisme oo taageera.
Shirkadda Royal Steel Group waxay bixisaa adeegyoAlwaaxyada birta qaab-dhismeedka ee CSA G40.20/G40.21cabbirrada caadiga ah iyo kuwa gaarka ah labadaba, waxaanan ku siin karnaa kormeer cabbir ah, tijaabin agab, iyo kormeer dhinac saddexaad ah oo loogu talagalay alaabtan si ay u buuxiyaan shuruudaha mashaariicdaada caalamiga ah.
| Shay | Faahfaahinta |
| Badeecada | Biyo-xidheenka W / Biyo-xidheenka Ballaaran |
| Heerka Caadiga ah | CSA G40.20 / CSA G40.21 |
| Darajooyinka Caadiga ah | 44W, 50A, 50AT, 70WT |
| Cabbirka Kala Duwan | W100 - W1000 |
| Nooca Qaybta | Qaabka W / Flange ballaaran |
| Alaab | Birta Kaarboonka Dhismaha |
| Codsiga | Qaab-dhismeedka Dhismaha, Buundooyinka, Xarumaha Warshadaha, Kaabayaasha Dhaqaalaha |
| Dusha sare | Madow, La toogtay, La rinjiyeeyay ama La Habeeyey |
| Dhererka | Dhererka Gooynta Caadiga ah ama Gaarka ah |
| Kormeerka | Shahaadada Imtixaanka Mill (MTC), Kormeerka Dhinac Saddexaad ayaa diyaar ah |
Halabuurka Kiimikada
| Fasal | Ugu badnaan C (%) | Mn ugu badnaan. (%) | Ugu badnaan (%) | Ugu badnaan P (%) | Ugu badnaan (%) | Cu* (%) |
| 44W | 0.23 | 1.5 | 0.4 | 0.04 | 0.05 | — |
| 50A | 0.23 | 1.5 | 0.4 | 0.04 | 0.05 | — |
| 50AT | 0.23 | 1.5 | 0.4 | 0.04 | 0.05 | — |
| 70WT | 0.2 | 1.6 | 0.4 | 0.03 | 0.03 | — |
Qoraalo:
*Cu waxaa lagu qeexi karaa marka loo baahdo iska caabbinta daxalka jawiga ama qeexitaanka mashruuca.
Shuruudaha ka kooban kiimikada way kala duwanaan karaan iyadoo loo eegayoheerka birta, dhumucda badeecada iyo daabacaadda CSA G40.20/G40.21 ee khuseysa.
Halabuurka kiimikada kama dambaysta ah waxaa xaqiijin doonaShahaadada Imtixaanka Mill (MTC).
Shuruudaha gaarka ah ee mashruuca, kormeerka dhinac saddexaad sidaSGS / BVwaa la diyaarin karaa.
Sifooyinka Farsamada
| Fasal | Xoogga Wax Soo Saarka, Ugu Yar (MPa) | Xoogga Tijaabada (MPa) | Kordhinta, Ugu yaraan (%) |
| 44W | 300 | 450–620 | 20 |
| 50A | 345 | 450–620 | 20 |
| 50AT | 345 | 450–620 | 20 |
| 70WT | 485 | 620–760 | 16 |
Fiiro gaar ah:
Shuruudaha hantida farsamada way kala duwanaan karaanheerka, dhumucda badeecada, jihada tijaabada iyo daabacaadda CSA G40.21 ee khuseysaQiimaha kama dambaysta ah waa in lagu xaqiijiyaa heerka khuseeya iyoShahaadada Imtixaanka Mill (MTC).
| Qaybaha Dhismaha - Xogta Qorraxda W | |||
|---|---|---|---|
| Metrik | Qoto dheer | Ballaca Fl | Dhumuc weyn |
| W100X19.3 | 4 1/8 | 4 | 3/8 |
| W130X23.8 | 5 | 5 | 3/8 |
| W130X28.1 | 5 1/8 | 5 | 7/16 |
| W150X13.5 | 5 7/8 | 4 | 3/16 |
| W150X18 | 6 | 4 | 1/4 |
| W150X22.5 | 6 | 6 | 1/4 |
| W150X24 | 6 1/4 | 4 | 3/8 |
| W150X29.8 | 6 1/4 | 6 | 3/8 |
| W150X37.1 | 6 3/8 | 6 1/8 | 7/16 |
| W200X15 | 7 7/8 | 4 | 3/16 |
| W200X19.3 | 8 | 4 | 1/4 |
| W200X22.5 | 8 1/8 | 4 | 5/16 |
| W200X26.6 | 8 1/8 | 5 1/4 | 5/16 |
| W200X31.3 | 8 1/4 | 5 1/4 | 3/8 |
| W200X35.9 | 7 7/8 | 6 1/2 | 3/8 |
| W200X41.7 | 8 | 6 1/2 | 7/16 |
| W200X46.1 | 8 | 8 | 7/16 |
| W200X52 | 8 1/8 | 8 | 1/2 |
| W200X59 | 8 1/4 | 8 1/8 | 9/16 |
| W200X71 | 8 1/2 | 8 1/8 | 11/16 |
| W200X86 | 8 3/4 | 8 1/4 | 13/16 |
| W200X100 | 9 | 8 1/4 | 15/16 |
| W250X17.9 | 9 7/8 | 4 | 3/16 |
| W250X22.3 | 10 | 4 | 1/4 |
| W250X25.3 | 10 1/8 | 4 | 5/16 |
| W250X28.4 | 10 1/4 | 4 | 3/8 |
| W250X32.7 | 10 1/8 | 5 3/4 | 3/8 |
| W250X38.5 | 10 3/8 | 5 3/4 | 7/16 |
| W250X44.8 | 10 1/2 | 5 3/4 | 1/2 |
| W250X49.1 | 9 3/4 | 8 | 7/16 |
| W250X58 | 9 7/8 | 8 | 1/2 |
| W250X67 | 10 1/8 | 8 | 5/8 |
| W250X73 | 10 | 10 | 9/16 |
| W250X80 | 10 1/8 | 10 | 5/8 |
| W250X89 | 10 1/4 | 10 1/8 | 11/16 |
| W250X101 | 10 3/8 | 10 1/8 | 3/4 |
| W250X115 | 10 5/8 | 10 1/4 | 7/8 |
| W250X131 | 10 7/8 | 10 1/4 | 1 |
| W250X149 | 11 1/8 | 10 3/8 | 1 1/8 |
Guji badhanka ku yaal Midig
Dusha Caadiga ah
Dusha sare ee kulul ee la galvanized
Dusha sare ee Saliidda Madow
Shirkadda Royal Steel Group waxay bixisaa adeegyo gaar ahCSA G40.20/G40.21 W Beamsmashaariicda dhismaha Kanada, kaabayaasha dhaqaalaha iyo warshadaha. Xalalka gaarka ah ayaa la heli karaa iyadoo loo eegayo sawirrada mashruuca, qeexitaannada iyo shuruudaha qaab-dhismeedka.
Darajooyinka:44W, 50A, 50AT, 70WT
Cabbirka Kala Duwan:W100–W1000
Dhererka Gaarka ah:Dhererka jarista caadiga ah ama mashruuca gaarka ah
Jaritaan Gaar ah:Goynta saxda ah sida waafaqsan sawirada
Daaweynta Dusha Sare:Madow, rinjiyeysan, rasaas lagu riday ama la galiyey
Samaynta:Qoditaanka, feereynta godka, jarista iyo farsamayn kale ayaa la heli karaa
Taageerada Mashruuca:
Soo gudbi adigaCabbirka alwaaxda W, darajada, tirada, dhererka ama sawirrada si loo helo xal xigasho iyo wax soo saar oo gaar ah.
1. Dhismayaasha Ganacsiga iyo Guryaha:Alwaaxyada W waa alaab alwaax ah oo casri ah oo loo sameeyay qaab-dhismeedka ugu muhiimsan, alwaaxyada sagxadda iyo darbiyada culayska qaada.
2. Dhismayaasha Warshadaha:Ku habboon in loo isticmaalo bakhaarka, aqoon-is-weydaarsiga, warshadda, goobta shaqada iyo qaab-dhismeedka culus.
3. Buundooyinka & Kaabayaasha Dhaqaalaha:Biyo-mareennada buundooyinka waxaa loo isticmaalaa buundooyinka, gaadiidka iyo mashaariicda kale ee kaabayaasha dhaqaalaha ee leh baahiyo xoog sare leh.
4. Mashruucyada Macdanta & Tamarta:Ku habboon macdanta, saldhigga korontada, nidaamka tamarta, iyo dhismaha warshadaha culus.
1.CSA G40.20/G40.21 Heerka
Shuruudaha Birta Dhismaha ee Kanada, darajooyinka waa 44W, 50A, 50AT iyo 70WT.
2. Kala duwanaanshaha cabbirka ballaaran
Cabbirro kala duwan oo qaab-W ah iyo alwaaxyo ballaaran oo flange ah ayaa la bixiyaa si loo daboolo baahiyaha naqshadaha qaab-dhismeedka kala duwan.
3. Xakamaynta Tayada ee La Isku Halleyn Karo
Halabuurka kiimikada, sifooyinka farsamada, cabbirrada, toosanaanta iyo tayada dusha sare ayaa la ogaan karaa ka hor inta aan la keenin.
4. Sameynta Gaarka ah
Habaynta caadiga ah sida jarista, qodista, alxanka iyo sameynta godadka, dhererka loo habeeyey iyadoo loo eegayo sawirrada.
5. Dukumentiyada oo Buuxa
MTC, warbixinnada tijaabada, liiska baakadaha, iyo dukumentiyo kale oo loogu talagalay dhoofinta ayaa la soo saari karaa.
6. Kormeerka Dhinac Saddexaad
Kormeerka SGS, BV, ama kormeer kale oo dhinac saddexaad ah ayaa loo diyaarin karaa iyadoo loo eegayo shuruudaha iibsadaha.
7. Khibrad Dhoofinta Adduunka oo dhan
Adeegga dhoofinta xirfadeed laga bilaabo baakadaha, rarida, dukumeentiga kastamka ilaa isku-dubaridka keenista.
8. Adeegga Diiradda saaraya Mashruuca
Waxaan bixinaa xalal loogu talagalay qandaraaslayaasha, farsameeyayaasha birta, qaybiyeyaasha iyo mashaariicda injineernimada oo leh alwaax bir ah.
Alwaaxyada qaabka W waxaa badanaa si adag loogu xiraa suumanka birta ah si ay isugu hayaan inta lagu jiro rarista oo looga fogaado wax khasaare ah. Baakad taxaddar leh ayaa la bixin karaa iyadoo lagu saleynayo habka rarista iyo qofka qaadanaya.
Xulashooyinka keenista waa:
Xamuulka konteenarka
Maraakiib badan oo rarida
Sida waafaqsan baahiyaha mashaariicda, waxaan taageernaa shuruudaha ganacsiga caalamiga ah ee FOB, CFR, CIF iyo iwm.
S1. Cabbirrada W Beam noocee ah ayaad bixin kartaa?
A: Waxaan bixinaa noocyo badan oo W100–W1000 ah, iyadoo cabbirro iyo miisaanno gaar ah la heli karo marka la codsado.
S2. Ma bixin kartaa W Beams oo gaar loo sameeyay?
J: Haa. Waxaan taageernaa dhererka gaarka ah, jarista, qodista, sameynta iyo daaweynta dusha sare iyadoo lagu saleynayo sawirrada iyo shuruudaha mashruuca.
S3. Ma bixin kartaa kormeerka MTC iyo dhinac saddexaad?
J: Haa. Waxaan bixin karnaa Shahaadooyinka Imtixaanka Mill (MTC) waxaanan taageeri karnaa kormeer madax-bannaan oo ay sameeyaan SGS, BV iyo hay'ado kale oo la aqoonsan yahay.
S4. Imtixaanno tayo leh oo noocee ah ayaa la heli karaa?
A: Tijaabada waxaa ku jiri kara halabuurka kiimikada, xoogga jiidista, xoogga wax soo saarka, dheereynta, kormeerka cabbirka iyo toosanaanta iyadoo loo eegayo shuruudaha khuseeya.
S5. Sideen u codsan karaa qiimeyn?
J: Fadlan bixi cabbirka W Beam, darajada, tirada, dhererka loo baahan yahay, meesha la geynayo iyo qeexitaan kasta oo mashruuc ah si aad u hesho xigasho sax ah.
Halkan ku qor fariintaada oo noo soo dir
